by Anaglyph Ltd.
Modules & Specifications
Platforms supported include Windows XP/Vista/7/8/10 32- & 64-bit.
Panels module: Preliminary analysis of rectangular or circular, with point, line or pressure loads, rib-stiffened sub-components
Beams module: Preliminary analysis of sub-components with T, I, U, box, tube, angle sections in various configurations
Laminate module: CLT analysis for stiffness and strength, moisture, conduction, fatigue
Joints module: Preliminary analysis of sub-components with bolted or bonded double-lap joints in tension
Flanges module: Preliminary analysis of sub-components with thick, curved beams
Materials Synthesiser module: Material property synthesis, stiffness, strength, hygrothermal
PREDICT module: Crack propagation simulation
Parametric option for Panels, Beams, Laminates, Joints and Flanges modules allows any output parameter to be assessed as a function of variation in any input parameter (e.g. failure ratio vs. rib height).
In addition to CoDA, Anaglyph also has included their Laminate Analysis Program (LAP) software through the APA. Learn More
Modules and Products Not Currently Available Through the APA
Laminate Tools: Laminate Tools is a stand-alone Windows application which addresses the entire Design-Analysis-Check-Manufacture group process of structural design, focusing on the composite material features
PlyMatch: PlyMatch is an innovative technology for the shop floor, that integrates hardware with software, to assist in accurately and correctly placing plies during hand-layup manufacturing.